Canadian UAV Solutions Inc.
Licenced UAV Service Provider,Specializing in Precision Aerial Data Imaging
Murray Hunt, Vice president / Operations
P.O. Box 132 WASAGA BEACH, ON L9Z 1A2
Canadian Uav Solutions Inc. is one of Canada’s most experienced and qualified aerial UAV service providers.
Over the past seven years our Professional pilots, along with our fleet of certified UAVs have flown hundreds of hours and surveyed thousands of hectares. All of our pilots have “advanced” RPAS licences, and along with our certified aircraft, we are able to operate in CONTROLLED airspace anywhere in Canada.
Even more important than our flight experience, and qualification, is the quality data we provide.
All of our Photogrammetry projects are processed in house by our GIS professional certified photogrammetrist
We provide a Safer, and cost effective alternative to many Municipal applications:
Urban Planning and Corridor mapping, Road, Rail, and utility inspections, Environmental, and Landfill monitoring, Zoning And Bylaw compliance, Natural Disaster assessment, Flood Plain Mapping, Municipal Drain inspection and planning, Pre-construction planning, Construction project monitoring and tracking, Asset Management data collection
All of Ontario
8:00 am to 6:00 pm
Articles by Canadian UAV Solutions Inc.:
Scope of work:
First phase: 80 Hectares, Orthographic Image 5cm, 3m DTM, 1m Contours
Second Phase: Additional 35 Hectares tying into first phase, Orthographic image 5cm, 3m DTM, 1m Contours
To identify drainage and topography for a new subdivision in Wasaga Beach.
Conditions and Requirements:
Large swaths of the survey area were heavily wooded or swampy wetlands, causing issue with accessibility and reliable survey information.
Accuracy requirements were +/-10cm on bare earth and +/-30cm in wooded/wetland areas.
We were able to provide accurate data where it was near impossible to obtain with a ground crew.
Was done in a similar amount of time as a standard ground survey, however the number of crew required was significantly less, and thus reflected in considerable savings. (enough to extend the survey area)
QA/QC reports a RMSE on check points found on bare earth and wooded areas no greater than 6cm on the Z and 3cm on the XY, well within specified accuracy requirements.
- Paul Hausler, Senior Project Manager R. J. Burnside & Associates Limited
Awards, Certificates or Designations
- Advanced RPAS Pilot License
- Member of CANADIAN INSTITUTE of GEOMATICS
- Certified professional PHOTOGRAMMETRIST on staff
- Tim Stubley – Project Manager Goldcandle
- Ted Garden , E.R. Garden Limited , Ontario Land Surveyor